Ropes
Shackles and hooks
Polyester Slings
Hoisting
Lifting tools
Protective Equipment
Compliance to EN1677-4
The WLL of for links, rings, masterlink, and assemblies are determined from the proof load, not from breaking force
Master link
Grade 8 Master Link is made from high tensile alloy steel according to EN1677-4. The forged G80 master links are forged for all sizes for the maximum working load. It will be fit for single and double leg EN818-4 Grade 8 chain slings. The master links have a much bigger width design for a bigger crane hook. Sizes from 3.2T to 65T and bespoke sizes are available.
Features:
- Material: High tensile Alloy steel.
- Processing: Forged, Quenched & Tempered.
- Proof Loading: 2 times Working Load Limit.
- QC: Magnetic Powder Flaw Detection, Breakage test and fatigue test.
- Finish: Red or Yellow Coated.
Description
Metric Specifications
| Part Code | Description |
Chain Size mm Single |
Chain Size mm Double |
A mm |
B mm |
D mm |
Box Qty. |
WLL tonnes |
Mass kg |
| 8-H01-0806 | ML0806-8 | 7/8 | 6 | 110 | 60 | 16 | 30 | 2.12 | 0.54 |
| 8-H01-1008 | ML1008-8 | 10 | 7 & 8 | 135 | 75 | 18 | 20 | 3.15 | 0.82 |
| 8-H01-1310 | ML1310-8 | 13 | 10 | 160 | 90 | 22 | 10 | 5.30 | 1.50 |
| 8-H01-1613 | ML1613-8 | 16 | 13 | 180 | 100 | 26 | 8 | 8.00 | 2.32 |
| 8-H01-2016 | ML2016-8 | 20 | 16 | 240 | 140 | 32 | 3 | 12.5 | 5.66 |
Imperial Specifications
| Part Code | Description |
Chain Size inch Single |
Chain Size inch Double |
A inch |
B inch |
D inch |
Box Qty. |
WLL lbs |
Mass lbs |
| 8-H01-0806 | ML0806-8 | 1/4 - 5/16 | 1/4 | 4.33 | 2.36 | 0.62 | 30 | 4673 | 1.19 |
| 8-H01-1008 | ML1008-8 | 3/8 | 1/4 - 5/16 | 5.31 | 2.95 | 0.70 | 20 | 7100 | 1.80 |
| 8-H01-1310 | ML1310-8 | 1/2 | 3/8 | 6.29 | 3.54 | 0.86 | 10 | 12000 | 3.30 |
| 8-H01-1613 | ML1613-8 | 5/8 | 1/2 | 7.08 | 3.93 | 1.02 | 8 | 18100 | 5.11 |
| 8-H01-2016 | ML2016-8 | 3/4 | 5/8 | 9.44 | 5.51 | 1.26 | 3 | 27557 | 12.47 |
Related products
Commercial ratchet loadbinder
Load Binder with Parallel Hooks or Clevis Type
- Lashing capacity LC 4000 - 10600 daN
- The load binder is a universal tool to restrain and secure loads and freight.
- Manual operation of the binder lever extends or retracts the threaded spindles.
- Tension is upheld by the self-locking threads.
- The load binder is fitted with parallel hooks for direct attachment to chains or with clevis ends for use with existing fastening devices.
Connecting link
All William Hackett Grade 8 lifting components comply fully with the relevant section of EN1677, they are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load. The full compliance of these components means that they can be used in chain slings certified to EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
FEATURES:
- Size: 10mm
- WLL: 3.15ton
- BS: 12.6ton (4 times of WLL)
- Grade: 80 (T8)
- Made from Quality Alloy steel
- Drop forged and heat treated
- Test certificate supplied upon request
- Item # 81HL10
Horizontal lifting clamp (HC)
Toyolift Horizontal Plate lifting clamps are used in sets of two for the horizontal transportation of plate sections. Attachment and removal of the clamps from the plate is extremely easy due to the simple and straightforward design. The working load limits shown on the technical parameter table are based on a set of two clamps used together. Toyolift Lifting Clamps provide a fast and efficient method for lifting plate or any similarly shaped fabrications. Compact shape and relatively low unit weight with high lifting W.L.L. It can only be used in pairs using a two-leg sling or spreader beam.
Horizontal Plate lifting clamp
The Toyolift PLC pipe lifting clamps provide a durable are used in sets of two for the horizontal transportation of pipe sections. Attachment and removal of the clamps from the pipe is extremely easy due to the simple and straightforward design. The working load limits shown on the technical parameter table are based on a set of two clamps used together. Pipe Hooks provide a fast and efficient method for lifting pipe, tube or any similarly shaped fabrications. Compact shape and relatively low unit weight with high lifting W.L.L. It can only be used in pairs using a two-leg sling or spreader beam.
Turnbuckle with Eye-Eye End Fitting
- Hot Dip galvanized steel.
- End fittings are Quenched and Tempered / bodies heat treated by normalizing.
- Turnbuckles eyes are forged and elongated by design, to maximize easy attachment in system and minimize stress in the eye
- Lock Nuts available for all sizes
- BTEE-160 Eye & Eye Turnbuckle meets the performance of Federal Specifications FF-T-791b, Type 1, Form 1 -Class IV and ASTM F-1145.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY
Turnbuckle with Jaw-Jaw End Fitting
Hot Dip galvanized steel.
End fittings are Quenched and Tempered / bodies heat treated by normalizing.
Lock Nuts available for all sizes
BTJJ-162 Jaw & Jaw Turnbuckle meets the performance of Federal Specifications FF-T-791b, Type 1, Form 1 - Class VII and ASTM F-1145.
TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY
